Pool Automation in Central Florida
Premium Pool Automation for Homeowners Across Central Florida
Run Your Whole Pool From Your Phone
Expert Pool Automation Installation and Repair
Pool automation puts your pump, heater, lights, spa and more on one control system you can run from a wall panel or an app. Instead of walking out to the equipment pad to flip switches and turn valves, you set a schedule once and adjust it from anywhere. On a hot Central Florida afternoon, that means you can warm the spa on your drive home or turn on the lights for a night swim without leaving the lanai.
Our pool automation service starts with your equipment. First, we look at what you have, from the pump and heater to the lights, valves and salt cell. Next, we explain which pool automation systems fit your setup and your budget. Then we install the controller, wire the equipment, set up the app and program your schedules.
Once it’s running, we walk you through the app and panel so you’re comfortable using it. If your current system has stopped talking to your phone or shows an error, our pool automation repair service can track down the problem.
We work with Hayward, Pentair, Jandy and Zodiac systems across Central Florida. Whether you want a full system, an upgrade to an aging panel or a fix for one that stopped working, fill out the form for a free pool automation quote. We’ll tell you honestly what your pool needs and what it doesn’t, so you only pay for features you’ll actually use.
What Is Pool Automation?
A pool automation system is a controller that runs your pool equipment on a schedule and lets you change settings from a panel, a remote or an app. A basic timer only turns the pump on and off. Automation goes much further. It can set pump speeds, fire the heater, switch lights and colors, turn valves between pool and spa and run water features.
In practice, that means one place to control everything. You can set the pump to run slow overnight, heat the spa for an hour on Saturday and start the lights at sunset, all without touching the equipment.
What Pool Automation Systems Can Control
Most pool automation systems can handle:
- Pump schedules and variable speeds
- Pool and spa heating, including heat pumps and gas heaters
- Lights, including color-changing LED shows
- Valve actuators that switch between pool and spa or run waterfalls and bubblers
- Salt chlorine generators
- Spa jets, blowers and other extras
Some systems also add sensors that watch water chemistry and send you alerts. We’ll tell you which features your system supports and which ones make sense for your pool.
Why Pool Automation Makes Sense in Central Florida
Our strong sun, heavy summer swimming and afternoon storms make pool chemistry drift faster here than in many places. The more intense the sunlight and the more swimmers in the water, the harder it is to hold chlorine and pH steady. As a result, a pool that needs constant adjustment is a good fit for automated control.
Scheduling matters too. One turnover filters about 63% of the water, and each extra turnover catches more of what’s left. Automation makes it easy to run the pump long enough to keep up with a busy summer and dial it back in the cooler months. In addition, running the pump at a low speed overnight saves a lot of energy.
Pool Automation Brands We Work With
The three big pool automation platforms each have their own app and panel. All of them control the same basic equipment, so the best choice usually comes down to what you already own.
Pentair IntelliCenter
IntelliCenter is Pentair’s current platform. It works closely with Pentair pumps, heaters and IntelliBrite lights. Owners with older EasyTouch or IntelliTouch panels can often move up to IntelliCenter with an upgrade kit instead of starting over.
Hayward OmniLogic
OmniLogic is Hayward’s full automation system, built around Hayward pumps, heaters, ColorLogic lights and salt cells. If your older Hayward ProLogic or AquaLogic panel is failing, OmniLogic is the usual next step.
Jandy iAquaLink
iAquaLink is the app and control platform for Jandy and Zodiac equipment. It connects to Jandy AquaLink panels and works with Jandy pumps, heaters, WaterColors lights and valve actuators.
Pool Automation Installation
Every pool automation installation starts with a look at your equipment pad. We check what you have, how it’s wired and which parts can connect to the new controller. Some equipment talks to the controller directly. Other pieces connect through relays or need a valve actuator added.
We also build in the safety details. For example, a heater on an automated system needs a cool-down setting or fireman switch that turns the burner off before the pump stops. Only qualified, licensed people should do the electrical work, with the power shut off first. Finally, we program your schedules and show you how to use the app and panel.
Adding Automation to an Existing Pool
You don’t need a new pool to get automation. Most existing pools can add a controller, and we can upgrade many older panels instead of replacing them. If your pump is single speed, it’s a good time to consider a variable speed pump, and our pool pump replacement team can install one. The same goes for color LED lights, which our pool light replacement team handles.
Pool Automation Repair
Automation systems are reliable, but like any electronics, they can have problems. Common calls include an app that lost its connection, a panel showing an error code, a relay that won’t switch, an actuator stuck between pool and spa or a pump that won’t follow its schedule. Heat, moisture and ants inside the panel cause many of these problems, so keeping the panel cover closed and the area around it clear helps prevent them.
Our pool automation repair process starts with the basics. We check power, breakers and wiring, then the communication between the controller and each piece of equipment. After that, we test relays, actuators and sensors. Once we know the cause, you get a clear quote before we replace any parts.
Getting the Most From Your Pool Automation
A good setup takes a little planning. Here are the habits that help Central Florida owners get the most from their systems.
Adjust Schedules With the Seasons
Summer brings heat, heavy swimming and storms that wash debris into the pool, so the pump needs more filtering time. Cooler months need less. With automation, you can save a summer schedule and a winter schedule and switch between them in seconds. We’ll set both up for you at install.
Plan for Storms and Power Outages
Afternoon thunderstorms and the occasional hurricane can knock out power at the pad. After an outage, check the app to make sure the controller is back online and the schedules and clock are correct. If a breaker tripped, reset it or give us a call. During lightning, stay out of the pool even if the lights and features are running.
Keep a Strong Wi-Fi Signal at the Pad
The app only works when the controller can reach your home network. Equipment pads often sit at the far edge of the yard, so the signal can be weak. A Wi-Fi extender or a wired connection usually fixes dropped connections. We check the signal during install and suggest a fix if it’s weak.
Automation Still Needs a Person
Automation is a great tool, but it doesn’t replace someone who can act on what it tells you. An alert about low chlorine or low flow only helps if someone fixes the problem. That’s why automation pairs so well with weekly pool service. The system keeps things running between visits, and your tech keeps an eye on the water, the filter and the equipment.
Pool Automation Cost
Pool automation cost depends on the system you choose and how much of your equipment it controls. A simple controller for a pump and lights costs less. A full system with heater control, valve actuators, a spa and water features costs more. Upgrading an older panel is often less expensive than a new install. We look at your pad first and give you a clear price before we start.
Why Central Florida Homeowners Choose Sunwave
Sunwave is a family-owned Central Florida company with a licensed team. We set up automation around the way you actually use your pool, and you get a price before any work begins. There are no long-term contracts. Plus, one company can handle your automation, your equipment and your weekly cleaning. For heaters that tie into your system, see our pool heater installation service.
Schedule Your Pool Automation Today
Pool automation is one of our specialty pool services, and it’s all part of our pool service in Central Florida. Fill out the form or call (689) 312-9063 to take control of your pool from anywhere.
Our Service Areas
We serve homes across Seminole County and Orange County, including Sanford, Lake Mary, Oviedo, Winter Springs, Orlando, Winter Park and Windermere. See every community in our service area.
Pool Automation FAQs for Central Florida Homeowners
Here are the pool automation questions Central Florida homeowners ask us most. Still have a question? Give us a call at (689) 312-9063.
Pool automation systems are worth it for most owners who use their pool often or have a spa, heater or color lights. You control everything from one app, set schedules once and change them from anywhere. Automation also makes it easy to run the pump at low speed longer. It won't replace regular service, though.
The best pool automation system is usually the one that matches the equipment you already own. Pentair IntelliCenter pairs with Pentair gear, Hayward OmniLogic with Hayward and Jandy iAquaLink with Jandy and Zodiac. All three control pumps, heaters, lights and valves. Staying with your brand usually keeps the install simpler and the features fuller.
The cost to automate a pool depends on the system and how much equipment it controls. A controller for a pump and lights costs less. A full system with heater control, valve actuators and a spa costs more. Upgrading an older panel is often cheaper than starting fresh. We look at your pad and give you a clear quote.
Yes, you can add pool automation to an existing pool. Most pools can take a new controller, and many older panels can be upgraded instead of replaced. Some equipment connects directly, while other pieces use relays or new valve actuators. It's also a good time to consider a variable speed pump or color LED lights.
An automation system for a pool is a controller that runs your equipment on schedules and lets you change settings from a panel or app. It can control pump speeds, the heater, lights, pool and spa valves, water features and the salt cell. Some systems add chemistry sensors and alerts. It replaces a simple on and off timer.
If your Hayward ProLogic is failing, upgrading to OmniLogic is usually the easiest path when your pump, heater, lights and salt cell are Hayward. Switching brands can make sense if most of your equipment is Pentair or Jandy. The best choice depends on what you own and which features you want. We'll compare both options for you.
Pool automation is reliable when it's installed and wired correctly and has a steady Wi-Fi signal at the pad. Most problems turn out to be communication drops, a tripped breaker or a stuck actuator. Failed controllers are much less common. Keeping the panel shaded and dry helps too. When something does go wrong, an alert tells you right away.
Yes, you can usually add a variable speed pump to your existing automation system. Many pumps connect to the controller over a data cable, which lets the system set speeds directly. Others run on their own schedule through a relay. Brand matching matters here, so we check your panel before choosing the pump.
Your automation panel can usually control color-changing pool lights, especially when the lights and the panel are the same brand. The panel switches the lights on and off and can select colors and shows. Mixed brands may only allow on and off control. We set up the light circuits and color settings as part of the install.
You can build your own pool automation with smart relays or a home automation hub, and some handy owners do. It takes electrical skill, and pool wiring near water carries real shock risk, so it should meet code and be done by qualified people. A packaged system is easier to support and already works with your equipment.